Jump to content
Server maintenance Read more... ×

Jeremyxe

Members
  • Content Count

    28
  • Joined

  • Last visited

  1. Thanks for the feed back guys , will mainly only be a weekender ( will be running about 300kw at the wheels ) just want to make sure it stops aswell as it should hopefully go. Maybe I should try some dba slotted rotors and pads and some braided lines before I drop the money on a kit that I may not even require. But the Vikings seem to be the way to go
  2. Hi guys just wondering if anyone is actually running the UPC 330mm brake kit ( sold on ebay) seen a few bad reviews on them and wonder if there worth taking the gamble for $1000 or should I spend the money and go hopper stoppers kit ? Also tossing up between the Viking coil overs or xyz both seem to be a good bit of gear but just tossing what way to go as both are about $1000 for the fronts just not sure what way to go haha. If anyone could help would be hugely appreciated cheers!
  3. Jeremyxe

    Sway bar upgrade ?!

    To easy 27mm front and 24mm back it is , thanks again for the help.
  4. Jeremyxe

    Sway bar upgrade ?!

    Bigger the better by the sounds of it haha , yeah really want to get rid of that 'boat' feel as mine it's fairly lowered aswell . Thanks guys muchly appreciated
  5. Jeremyxe

    Sway bar upgrade ?!

    Would you recommend the 24mm or 27mm fronts?
  6. Hey guys just wondering if upgrading my sway bars to some whiteline heavy duty sway bars will increase the handing/ ride of my xe ?? Or money not worth spending ? Thanks
  7. Jeremyxe

    Help 350 Holley choke.

    Thanks heaps man did exactly what you said and works a charm ! Just had to play around with it to get it right but alls good . Thank goodness for this forum ! Haha
  8. Jeremyxe

    Help 350 Holley choke.

    Ahh I see so with this cam you speak of is it visible looking down into the carb ? Sorry for the questions I'm only new to this all
  9. Jeremyxe

    Help 350 Holley choke.

    Yeah that's the same setup that I have all that's fine I'll just have to give tweaking the idle screw a go and see what happens. Thanks for the help guys
  10. Jeremyxe

    Help 350 Holley choke.

    Hey guys not long ago I put a 350 Holley on my crossy , a problem that I can't seem to set up right is the manual choke cable. Have watched the Holley DVD on how to install it properly and done exactly what they told me. Though when I pull on the choke the revs don't change at all ? Have made sure everything is moving right and it all is ? If anyone knows what could be wrong it would be awesome to find out haha . Or is it easier just to ditch it for an electric choke ? :/ Thanks.
  11. Jeremyxe

    Speedo Gear Help ???

    cheers haha i didnt even see that thread ! wouldnt by any chance know what colour it is haha?
  12. Hey guys just recently put a nice fresh fully reco'd LSD diff( Diff ratio 3.27). Into my xe (4.1litre) Just wondering to get my speedo right what speed gears should i put into my gearbox ( T5 ) ???. If it helps my dash speedo is 15km/h out up to 70km/h and 70km/h to 100km/h is out 20km/h. Hoping my description is half understandable haha. Thanks
  13. Hey guys just recently put a nice fresh fully reco'd LSD diff( Diff ratio 3.27). Into my xe (4.1litre) Just wondering to get my speedo right what speed gears should i put into my gearbox ( T5 ) ???. If it helps my dash speedo is 15km/h out up to 70km/h and 70km/h to 100km/h is out 20km/h. Hoping my description is half understandable haha. Thanks
  14. Jeremyxe

    benefits of fitting a msd

    Cheers for the help guys !
  15. Jeremyxe

    benefits of fitting a msd

    Might have to start saving and just go all out haha..shame apprentice pay rates arnt that crash hot. Is there any certain after market distributors that you can get ??
×