Justo

fixed it just swapped the red black wire to the red yellow wire and then the red yellow wire to the red black wire and all good now no parkers ? wtf??

hey everyone, ok so after putting a xe wiring loom and dash into my xf i came across a lot of problems with my lights now there all fixed except for one thing my HIGH BEAMSSS! they don't work flash does mbut no high beam so i bought a new switch replaced relays and fuses and then i was like fuck it i'll put the old xe switch on and see if that works and now everything works fine BUT i can't use my switch to pass rego its broken little metal pin and plastic casing is broken and just falls down so its always turning right but any way i want to put my xf one in how? are the wires different some how between them they all look the same? and whats this random green and white wire go to that is from the pink and yellow wire on the headlight plug( they weren't connected at all even when the xe switch fixed the high beam issue? please help ????

did you end up figuring it out because mines doing the same thing but with a xe wiring harness in a xf and we came down to the oil pressure wire was crossed with a high beam wire but not sure where yet

i know you use to be able to get them off ebay but i have a question i need help with my xe cluster the speedo sits at 30km'h when cars off and clusters out and when i use to go over 120 in it it would hit 120 and the needle would just sit there? i would love to just fix this instead of getting another aswell

i wish i could but the indicator where itconnected theres a little plastic thing snapped inside it a real bitch. so every time you put the blinker up or hit a bump the right side blinker comes on

the wrining i need help with, those silver wires like wtf?

Give me a sec and ill go take some pics for you, its bad

yeah went awesome to use to be a old track car all new suspension leafsprings everything and all it had was a mild cam piston rings were gone use to drink so much oil but still use to fly never knew how fast i got her because as soon as the speedo hit 120 it stopped there but the car kept going

hey everyone, for the last couple days i've been chancing a haynes manual everywhere but can't find one :/ i have a xe s pack ute and a xf sedan was planning on fixing my ute up but found extreme amounts of rust through her so i moved on to plan B fix the XF up it looks pre sweet with a sunroof, electric blue paint lowered on kingys no motor box or dash or front seats so i decided to take the dash and wiring loom out of the xe and put it in the xf so far so good headlights are wired up not sure if they work yet either and most of the wiring done BUT thenit comes to the indicator/wiper switch high beam/low/beam i have 4 wires left over a grey a black and to clear silver ones?? also i've realised i have to get a switch to turn in my lights since the xe had a pull switch to turn the lights on and pull again and you have high beam i need to make that work on my steering wheel i'll grab a switch of a eb to ef car tomorrow but yeah i need as much help as i can get im not the best with wiring and multimeters and that shiz so yeahh keen to get this shit done my XF my XE so rusted and you can't even see it