-
Content Count
527 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by bigpaulo
-
Does anyone have an XF with the trim code T8? According to Ford it is "tanbark pinstripe cloth". I'd like to see what that looks like from factory. Cheers!
-
Ive read about people with v8s putting 302 rods into their 351, apparently it makes it rev more and increases compression? So...what would happen if you put 200 rods into a 250? Would it work? Would it be an improvement?
-
Gav thats awesome. Thanks so much for going into so much detail. Yeah ive found it can be pretty bewildering when diving into the art of detailing. Ive been watching vids on youtube, but they can also get a bit confusing as different people have different methods. I think my best bet would be to find a spare panel and have a practice before hitting my own car. Waxit seem to have some pretty good deals on DA polishers and product.
-
Im looking at getting a DA polisher so i can have a crack at getting rid of swirl marks in the clear coat. Ive watched a fair few "how to" youtube vids and i reckon i could get the hang of it. Has anyone here had a go at this before and can give me their advice? Im mainly wondering what the best way is to prepare the panels before i hit them with the polisher. Cheers!
-
Haha yep the other end! On carby models the pcv is on the oil filler cap which is at the front. I think the efi ones have it at the back.
-
Yo So, ever since i put the holley carby and changed to a small air filter, that pipe on the back of the rocker cover that usually goes into the bottom of the air cleaner has just been flopping about all over the engine bay... i never knew what else to with it. I changed my oil the other week and noticed a fair bit of sludge in the bottom, thought ive been sucking years of crap in through that open pipe. Can you fit those little oil breathers onto the back of the rocker cover there? Any recommendations? Ive never really looked into them before. Also, where that pipe connects on the rocker cover is a right angle fitting, can i change this to vertical so if i put a breather on it'll sit upright? Cheers y'all!
-
I think we might be on the wrong path here... i have a pcv that is plumbed up and working fine, i dont have any intention to stuff around with that. I just wanted to do something about the pipe at the back of the rocker cover that lets air in. Its all good ive figured out how to sort it, ill put a pick up when ive fixed it up.
-
Im not sure a catchcan is what im after... I just wanted something over the end of the "suck in" pipe so it doesnt suck crap into the rocker cover
-
Oh wait hang on im a bit confused now. The circulation of air, does it go -->air cleaner-->rear rocker cover pipe-->pcv--> Or -->pcv-->rear pipe-->air cleaner--> I hope this makes sense Id draw a picture but im no picasso
-
Ive read all the posts about the aftermarket XF lights not being as good as the originals, especially to do with the refelectors and the light beam. But I was wondering if they are a slightly different size to the originals? or if i'm just imagining things... The panel shop put aftermarket headlights in my ute, and I reckon there is too much gap between the lights and the bonnet, but if i lifted them thered be too much gap above the bumper. These pics should give an idea what i mean. Anyone else had this issue? Also, will ford glass fit over aftermarket housing? because if the glass is all it takes to make them fit better, i reckon i might be able to hunt some up. Cheers!
-
I think, from memory, i have 60 jets (or there abouts), 8.5 power valve, and a 38 squirter. I think... I remember when changing the power valve i also bent a thin guitar string into the powervalve holes in the metering block. Acts as a restrictor and i found my car definitely ran better with it in there. Stock apart from carby and exhaust.
-
My old man bought this stuff from some bloke in a carpark a few years ago. He did a demo on his car and it was pretty impressive. I have still never used it to this day tho.
-
Nooooooooo polson dont do it! Haha. I reckon they look too rounded to suit the x series shape. Takes away from the oldschool-ness
-
Removing plastic moulds from around ute rear screen
bigpaulo replied to XF001's topic in Body and Exterior
When you put it all back together you'll need to get some contact adhesive and glue the headling back along the ridge in the window. Otherwise when you put the window back in its liable to push the headlining down. just a handy tip! -
Removing plastic moulds from around ute rear screen
bigpaulo replied to XF001's topic in Body and Exterior
I just did this, massive job! First, remove the rear window. Take it right out. Next youve gotta try and peel the headlining back away from the rear window. Its probably gonna be glued along the rear edge, so you have to try and break the adhesive without breaking the headlining. Also completely remove your interior light. It might also help to remove your rear vent window rubbers, and c pillar trims just so you can peel the headlining back far enough. Once the headlining is back, if you reach up and feel along the top of the rear window you will feel 4 threads with nuts on poking through into the cab. Undo these nuts and the top trim will be loose. The same applies for the side plastics, there are two threads on each one that poke through into the cabin. Hope this helps. Good luck! -
So i grabbed a couple of these radios from the wreckers the other day the guy at the wreckers told me i'd need the code to get them working. but i thought surely in this day an age theres a way to crack a 25 year old radio code... Any ideas??
-
Ive got no idea what the vin is, I scored them from a wreckers, they were already out of the car
-
Now that my utes been resprayed, im pretty keen to keep it looking this good. Ive seen heaps of detailers advertising paint protection, like a ceramic/glass or silicone coating or something similar, I dont really understand how it works. Whats the pros and cons of this paint protection stuff, and what alternatives, if any. My two biggest enemies are stonechips and bird shit. I have to park my car outside, and im pretty sure the birds in my area eat battery acid and then lock their targets directly on my car... Cheers!
-
Hey valvebouncer id definitely be keen to see a thread on how to correctly wash dry and wax a car. I've never used any wax or clay bars or anything other than car shampoo, so im all up for learning
-
do bonnet protectors leave marks when you install them, or can they be taken on and off easily?
-
thats the sort of thing ive got in mind hendrix. was it expensive stuff?
-
i pulled out the ashtray under the radio and fit a 2inch guage in there. i never mounted it properly but it fits in the cavity perfectly. You could probably make up a nice bracket/faceplate to go around them
-
whats a log manifold? or a log engine? the pre crossflows are sometimes referred to as log motors. and ive heard the word log used to describe some modern manifolds. i tried googling it but nothing really answered my question (that i could understand anyway) Cheers!
-
I figured out a technique to driving with the crate... youve really gotta lay right back, hang your bum off the edge hahaha