Jump to content
Server maintenance Read more... ×

Leaderboard


Popular Content

Showing content with the highest reputation on 09/20/2020 in all areas

  1. 2 points
    Ando81

    clutch cable reinforcement

    That’s very similar to mine dean. My sedan has some chrome under the bonnet so I got it made out of stainless as I couldn’t weld stainless at the time. I made my ute one out of mild steel and painted it white [emoji1303]
  2. 2 points
    bear351c

    Boingk's F250 4x4

    Oh those gauges are awesome.! Tell me you're keeping them...
  3. 1 point
    deankxf

    clutch cable reinforcement

    could add to this with .. reinforce the pedal box in a similar fashion i only have the one photo mid progress, but it got the hole in center welded to the back of the pin and more on the outside.(cooled at times so the plastic didn't melt on the brake pedal shaft) overkill would be to weld a sleeve to the brace above, like this one below
  4. 1 point
    CHESTNUTXE

    Boingk's F250 4x4

    yeah
  5. 1 point
    CHESTNUTXE

    Boingk's F250 4x4

    paint it blue and do a WOLF CREEK tribute
  6. 1 point
    Boingk

    Boingk's F250 4x4

    There we go, try that gents.
  7. 1 point
    Ando81

    clutch cable reinforcement

    Similar mate, I measured the angle of which the pipe comes out of the firewall and welded a slightly larger piece of pipe coming off the support plate at the same angle so that the plate and pipe fits snugly over the old hole and the cable pushes force over the new pipe and the steel all at the same time.
This leaderboard is set to Melbourne/GMT+11:00
×