Leaderboard

Ok just did a trick. I cut the blue wire with white trace at the ecu end turn key fans still went on .cut it at the relay hooked a wire to the relay end an to the ecu cut end on ecu Turned aircon on fans went on. Turned aircon off Turned heater on highest & lowest temp 16 with heater fan on low fans turned on turn. heater off fans off with motor running so somewhere in the harness something has happened for fans to turn on at all times even with just ignition on but not running even if wire was cut at the ecu so now that have hooked a new wire from the ecu plug out thru the window to the relay fans will now turn on with aircon on or with heater on hi or low temps turn heater off where screen says off on it no fans running do you think that was the problem wi th wire somewhere in the harness has possibly rubbed where l can’t see it ?? Sad part is l can’t just run the wire from the relay straight to the ecu on the left side as the wires for the relay run rite around past the front of the rad all the way into the drivers side then thru the damned dash to the ecu that way sol gotta pull the dash out just to run it properly an everything